电脑除尘（Computer dust removal）.docVIP

电脑除尘（Computer dust removal） Ready to work, first in the forum to inspect the disassemble diagram, understand the split keyboard procedures, ready tools: cross, gas blowing, screen cleaning wipes (estimated too dirty need cleaning, this screen can be used, I want to clean the dust should be, ha ha), clean the glasses cloth (to wipe wipes the remaining liquid), and a vacuum cleaner (boss said that too exaggerated, ha ha, but the effect is significant.), By the way, and my NOKIA 6681, a photo shoot, ha ha, everything is ready, the show is about to begin, ha ha! First off, pull the power, pull the panels, together with the computer back flat on the table (of course here to put the mouse pad below, so as to avoid the machine cover, but not to wear flowers) began to wash your hands first touch the keyboard under the water, Remove the static from your hands, dry your hands and start to work. Oh, ha ha! One: screw down First remove all the screws for the 4 fixed keyboards Put the computer on, now the keyboard is under the palm If you want to take the keyboard out, you should first let the card buckle off the palm, the method is thumb hard at the top of the arrow, so that the keyboard and the bottom of the palm will be between the gap When the left and right sides buckle completely away from the palm, you dont have to push any more Now you can gently lift the keyboard from the keyboard, mouse button, and gently pull in the direction of your own (note that the bottom of the keyboard has a connecting line, so be careful) C When the keyboard on the border and along the full detachment (see the keyboard slot in the rectangular yellow box), the keyboard can lift 90 degrees, you can now see the fan under the keyboard, and the other internal structure (in yellow circle) After lifting the keyboard, I saw the dusty fan and the bottom of the dirty keyboard. Ha ha, thats what I focus on today. It should be noted here is the connecting cable keyboard (shown in red circle), be careful no