ISO13715-2000技术制图.未定义形状的边缘.词汇和说明.pdfVIP

DEUTSCHE NORM December 2000 ICs 01.040.01 ; 01.1 00.20 Supersedes DIN 6784, February 1982 edition. Technische Zeichnungen -Werkstückkanten mit unbestimmter Form - Begriffe und Zeichnungsangaben (IS0 13715 : 2000) This standard incorporates International Standard IS0 13715 Technical drawings - Edges of undefined shape -Vocabulary and indications. A comma is used as the decimal marker. National foreword This standard has been prepared by ISO/TC 1O ‘Technical drawings, product definition and related documentation’, SC 6 ‘Mechanical engineering documentation’. The responsible German body involved in its preparation was the Normenausschuss Technische Grundlagen (Fundamentals in Technology Standards Committee), Technical Committee Technisches Zeichnen. The DIN Standards corresponding to the International Standards referred to in clause 2 of the IS0 Standard are as follows: IS0 Standard DIN Standard(s) IS0 128-20 DIN IS0 128-20 IS0 128-22 DIN IS0 128-22 IS0 129-1 DIN 406-1 O, DIN 406-1 1, and DIN IS0 129-1*) IS0 3098-0 DIN EN IS0 3098-0 IS0 81714-1 DIN EN IS0 81714-1 Amendments DIN 6784, February 1982 editi