abap字符串操作（ABAP string manipulation）.docVIP

abap字符串操作（ABAP string manipulation） 1).SHIFT: truncate string 2).REPLACE: replace string 3) TRANSLATE: conversion string 4) SEARCH: lookup string 5).CONDENSE: removes the space in the string 6).SPLIT: split string 7).CONCATENATE: connection string 8) moving field content 9) converted to a sorted format 10) overwrite character fields 11) get string length 12) the distribution string section 1).SHIFT: truncate string SHIFT, {c}, [BY, {n}, PLACES], [{mode}]: Role: removes the character of the previous n position of the string. If n is not specified, the default is 1. If the specified n is less than or equal to 0, the string remains unchanged. If the N exceeds the length of the string, the string becomes empty, so note that the n is specified when doing so. You can get the length of this string first: len = STRLEN (C). Mode: Specifies the direction in which the string is truncated. LEFT: is truncated from the left RIGHT: is cut off from the right CIRCULAR: put the characters on the left to the right. SHIFT, {c}, UP, TO, {str}, {mode}: Role: the string in the str before the characters are removed, the same can be specified mode, the principle is the same as above. SHIFT, {c}, LEFT, DELETING, LEADING, {str}. SHIFT, {c}, RIGHT, DELETING, TRAILING, {str}: Effects: these two statements are to remove the previous (LEFT) or later (RIGHT) characters STR in the string C. The above sentences are common occasions: A. removes the leading characters in the string. For example, if a field in ALV is a 10 bit character with so, Po, and number, and you dont want to display the previous 0, then you can do this: SHIFT, {c}, LEFT, DELETING, LEADING, 0. B. known that a string contains fixed characters, want to delete the characters in front of this fixed character, then you can use: SHIFT, {c}, UP, TO, {str}. For example, a material prefix is prefixed by increasing mga00002 and mga00003. This prefix is part of the data obtained in a fixed value table, and the prefix is removed from the spec