循环流化床锅炉在启动运行中所碰到（Circulating fluidized bed boiler is encountered during start-up and operation）.docVIP

循环流化床锅炉在启动运行中所碰到（Circulating fluidized bed boiler is encountered during start-up and operation） Content summary Starting from the difficult ignition, easy coking and serious wear of CFB Boiler in starting operation, this paper expounds the mechanism of these problems, and puts forward some measures to solve these problems in detail. With its unique advantages, circulating fluidized bed boiler is a coal combustion technology that is developing both at home and abroad. At the same time as everyone knows, in a circulating fluidized bed boiler start-up operation, there is widespread ignition difficult and easy coking and serious wear problems, people often say that the three. How to break through the three, has become one of the main topics in the popularization and application of circulating fluidized bed boiler. First, the ignition off For different kinds of coal and furnace structure, the ignition starting methods are different, but the generality is still the main one. The domestic 35-75t/h circulating fluidized bed boiler usually adopts light diesel oil ignition, and has two ways: bed ignition and bed ignition. Because the bed igniter has the characteristics of fast ignition, fuel saving, etc., and so widely used. In the actual operation process, some users due to driving the preparation is not sufficient or operation experience is not enough, when the ignition is always prone to fire or accident of coking furnace, from the ignition test run to steam and often go through ten times, twenty times or even more time, not only affect the progress of the project, but also wasted a lot manpower. How can we successfully through the ignition of the customs? 1. boiler installation acceptance, first should be the cold test, the purpose is to test the furnace fluidized state, understand the distributor resistance characteristics of boiler in the presence of the design and installation problems, propose solutions. The cold test includes: atomizing test, ignition air distributio