新好佳学会做led照明效果（）.docVIP

新好佳学会做led照明效果（） (1) effect drawing: Select good products, for some decorative projects, we have to do renderings. At present, the effect of rendering software is also more, of which the general is FLASH, this is also relatively easy to learn. A good FLASH designer does not necessarily design good LED renderings. The LED effect diagram is not only shown on the computer, but the LED effect is controlled by a controller that controls the LED light. The recommendations made in the LED effect diagram, we must consider whether the control system can be achieved . Otherwise, the computer shows the effect and the real effect, there will be inconsistent results, causing unnecessary disputes. (2) identify detailed plans: If your product and effect plan are passed by the customer, besides your price, your order will basically get you done. But then there is a more complex - scheme. We first need to know the size of the site and the environment of the site to determine how we plan to do it. 1) outdoor or indoor: This is more important, determine whether our product program should consider waterproof, sunscreen, and some other related indicators. 2) determine the size of the site to be lit, to choose how many products to use, how to connect, control system design, If it is not the exchange of power products, but also select the power supply as well as power distribution wiring security case. This is a relatively complicated link, It takes a lot of text and pictures to explain it better, so we put it in the LED book Detailed analysis. 3) we must pay attention to the details of the scheme, and try to make the connection simple, In this way, installation, debugging and maintenance will reduce the amount of trouble. Finally, we determine the controller, As to the choice of control and the example scheme, we have a detailed introduction of which section of the control system, which I will not detail here. 4) after all the products have been produced, as far as conditions permit, we c