新规范钢筋（New standard reinforcement）.docVIP

新规范钢筋（New standard reinforcement） 1, the old atlas to the 2002 edition of concrete regulations, 2001 edition anti regulation and 2002 edition high standard as the basis for the preparation of the new atlas to 2010 edition of concrete regulations, 2010 Edition anti regulation, 2010 Edition high standard as the basis for the preparation. 2, the old Atlas of a total of six, the new atlas integrated into three. 3, the old atlas wall column has 10 kinds, the new atlas wall column classification is divided into 4 kinds (still 10 kinds). 4, the old atlas shear wall tension bars only mark a space, the new atlas needs to mark two kinds of spacing, and increase two-way tension rib and plum two-way pull tendon schematic diagram. 5, Liang Gangjin anchor in the support of the hinge design and make full use of the tensile strength of steel design, the old atlas is the design should be in accordance with the Regulations regulations will be changed, the new atlas is the designer should note. 6, the old atlas plate category has 4 kinds, the new atlas for 3 kinds, canceled the extended cantilever board YXB. 7, the old beam plate beam AL atlas no no member, no new atlas of beams and slabs increases the AL component. 8, the old atlas does not distinguish between plate end support by hinge design, or by full use of steel tensile strength design, the new atlas has distinction, and the design should be noted. 9, the old board structure atlas of a total of 13 types of new atlas, a total of 11, cancel the plate TY and overhanging cornice corner reinforcement Cis. 10, the old Atlas of anchorage length divided into tensile reinforcement anchorage length La and minimum tensile reinforcement seismic anchorage length Lae, the new atlas of anchorage length is based on the basic anchorage length Lab, the correction factor calculation of tensile reinforcement anchorage length La and seismic anchorage length Lae. 11, the old atlas environment category three only one, the new atlas environment catego