goldwave简单教程（GoldWave simple tutorial）.docVIP

goldwave简单教程（GoldWave simple tutorial） *#06# sequence protection against theft *3370# phone restart 50% power 0000 to 10086, so check the business 00000 to 186201 A. quick get start GoldWave is the standard green software, no installation and small volume (compression only 0.7M), any directory several file compression package released to the hard disk, click GoldWave.exe started running. Since it is audio editing software, we have to use audio files to operate! Select the open command for the file menu, specify a file to edit, and press enter. In the absence of waiting time, GoldWave immediately shows the waveform state of the file and the softwares main interface (Figure 1), which surprised us at the speed at which it was run. The main interface from top to bottom is divided into 3 major parts, the top menu commands and shortcut toolbar, in the middle of the waveform display, the following is the file properties. Our main operations are concentrated in the waveform display area where the screen is the largest. If it is a stereo file, it can be divided into two channels, which can be operated separately or uniformly. 1. select audio events Before you can process various audio files, you must select a paragraph from it (the selected part is called an audio event). The selection of GoldWave system is very simple, make full use of the left and right mouse button with, in a location on the left click the mouse will determine the selected part of the starting point, right click in another position to determine the end point selection part, so choose audio events will be highlighted (Figure 2), we are now all operations are performed only on the high intensity region, the other part is not affected by the shadow. Figure 2: part of the high brightness display of course if you choose the right place or replace the selected area can use the edit menu selection command (or press Ctrl+W), and then re audio event selection. 2. cut, copy, paste, delete Audio editing and other Wi