intel储存器（intel储存器）.doc

intel储存器（intel储存器） Glossary AHCI?: An interface specification that allows software to communicate with SATA devices, such as host bus adapters, and enables advanced SATA functions such as raw order queuing, native hot swap, and power management. Advanced Host Controller Interface (AHCI). ATAPI device: A large storage device with a serial interface, such as CD-ROM, CD-RW, Blu ray discs, and tape drives. Advanced technology linked packet interface (ATAPI). Option ROM?: Firmware that is called by the system BIOS for communication and support to the hardware device. As far as this product is concerned, Option ROM provides boot support for RAID volumes and provides user interfaces for configuring and managing RAID volumes. Also known as OROM. RAID 0: A RAID type or configuration in which data is formed across a plurality of physical disks. Data across the array, members of the disk split into manageable blocks called bands. Tape generation does not create data redundancy, but improves read and write performance. RAID 1: A RAID type or configuration in which data is mirrored across second physical disks in an array. Mirroring is the main function of ensuring real-time data redundancy and improving fault tolerance. Strips not formed. RAID 10: A RAID type or configuration that uses four disks to create a combination of RAID types 0 and 1. The data is divided into strips across the two disk array (forming the RAID 0 component). Each disk in the RAID 0 array is mirrored to one of the disks in the RAID 1 array. RAID 5: A RAID type or configuration in which data and parity are separated across three or more disks into manageable blocks called bands. This type is the preferred configuration for both efficiency, fault tolerance, and data performance. RAID?: The independent / inexpensive disk redundancy array is a technique for computer data storage schemes that splits data and / or repeats across multiple disks. RAID can be designed to provide higher data reliability, or to provi