旅馆设计规范（Hotel design code）.docVIP

旅馆设计规范（Hotel design code） Article 1.0.1 This regulation is formulated in order to meet the basic requirements of application, safety and hygiene in the construction of a hotel. Article 1.0.2 This specification applies to newly constructed, converted and expanded town hotel building designs with at least 20 rental rooms. Hotel architecture with special needs can be referred to. Article 1.0.3 according to the hotels use function, according to the construction quality standards and equipment, facilities, the hotel construction from high to low is divided into one or two, three or four, five or six, 6 architectural level. Article 1.0.4 the building design of a hotel shall, in addition to the performance of this code, be in conformity with the current general rules of civil building design and the relevant standards and norms of the state. When designing a tourist foreign hotel, there should be a clear star goal, and the functional requirements should be in line with the relevant standards. The second chapter, base and general plane Article 2.0.1 base. First, the choice of base should meet the requirements of the local city planning, and convenient transportation, the environment should be in a good area. Two, in the historical and cultural city, scenic spots and key cultural relics protection units near the base selection and layout should be in line with the relevant national and local regulations and protection planning requirements. Three, the base of a town shall meet at least one urban road, and its length shall meet the requirements of the entrances and exits, passenger and freight transportation, fire evacuation and environmental sanitation in each functional area of the base. Article 2.0.2 general layout shall be in accordance with local climate characteristics and specific environment, and properly handle the relationship with municipal facilities. Two the main entrance must be clear and direct visitors to the lobby. The main entrance should be set according to