模具钳工常见问题解答100例（Mold fitter FAQ 100 cases）.docVIP

模具钳工常见问题解答100例（Mold fitter FAQ 100 cases） Mold fitter FAQ 100 cases Mold fitter FAQ 100 cases 1: what is the design? Answer: can accurately express the shape of objects, size and technical requirements of the mapping. 2: what is called projection map? Answer: is a group of rays through the object to the predetermined plane of the graphics obtained. 3: projection method of classification there are several? Answer: can be divided into central projection method and parallel projection method, parallel projection method is divided into positive projection and oblique projection. 4: what is cutaway view? A line of parallel light passing through an object on a projection surface 5: what are the three basic views of object projection? Answer: main view, top view, left view. 6: what is the projection law of the three view? Answer: Master, top view is right; main and left view of Gaoping is neat; bend and left view are equal. 7: what are the physical properties of metals? Answer: including density, melting point, thermal expansion, conductivity and thermal conductivity. 8: what is the melting point? Answer: the temperature at which metals change from solid to liquid. 9: what is the chemical properties of metals? Answer: refers to the metal material at room temperature or high temperature resist its surrounding chemical medium to its erosion ability. 10: what are the chemical properties? Answer: includes oxidation resistance and corrosion resistance. 11: what is called oxidation resistance? Answer: the ability to resist oxidation at room temperature or high temperature. 12: what is called corrosion resistance? Answer: in high temperature resistance to water vapor and other material corrosion ability. 13: what is mechanical performance? Answer: refers to the ability of metal materials to resist external force. 14: what are the mechanical properties? Answer: including strength, hardness, plasticity, toughness, fatigue strength and so on. 15: what is called deformation? Answer: