海尔电视维修实例（Haier TV maintenance example）.docVIP

海尔电视维修实例（Haier TV maintenance example） Haier TV maintenance examples (a) machine model 29FV6-A fault phenomenon: the top of the screen is bright line maintenance level measures jitter: replace the deflection coil analysis of maintenance: check the field power supply circuit of R414, D402, R414 have obvious yellowing phenomenon, disconnect the measurement of R414 and D402 have been damaged, that a negative... Haier TV maintenance example (a) Machine model 29FV6-A Fault phenomenon: the upper part of the screen has a horizontal bright line jitter Maintenance: replace deflection yoke Analysis of maintenance: check the field power supply circuit of R414, D402, R414 have obvious yellowing phenomenon, disconnect the measurement of R414 and D402 have been damaged, there are shows that field load circuit short circuit with a multimeter in road resistance measurement, no obvious damage element substitution field integrated circuit TDA8177, R414, D402 to replace the damaged boot, fault still, touch resistance R414 temperature rises gradually. Measuring the voltage of each TDA8177 foot, it is found that the voltage of the 4 pin is zero, the field deflection coil is broken and the measuring circuit is integrated. The power supply voltage of the integrated circuit is restored to normal. It is proved that the deflection is short circuited, and the deflection test machine is normal. (two) Machine model: D29FV6-A Fault phenomenon: boot work 4-5 hours, the image appears in the middle of 3 cm wide horizontal bright line. Maintenance measures: change C303 to 2200P ceramic capacitors Analysis of maintenance: this phenomenon belongs to components of poor thermal stability, breakdown voltage measurement TDA8177 each foot had no obvious change, substitution test capacitor C306, C302, C303 field, C308 test machine fault still, by this experimental machine by the failure of the time change of environmental temperature change. Check with heating method, use electric iron to test the heating o