煤质分析常见问题解答（Common questions in coal quality analysis）.docVIP

煤质分析常见问题解答（Common questions in coal quality analysis） Common questions in coal quality analysis What are the industrial analysis projects for coal combustion? What elements are included in the analysis? What are the symbols? Answer: Industrial Analysis of the coals non combustible components and combustible components, the former is water and ash, the latter volatile and fixed carbon, respectively, M, A, V and Fc said. Element analysis items include carbon (C), hydrogen (H), oxygen (O), nitrogen (N), sulfur (S), water (M) and ash (A). 1., what is the benchmark for coal combustion? What are the benchmarks? Answer: in industrial production or scientific research, sometimes for some purpose, some components of coal are removed and reassembled and their percentage content is calculated. This combination is called a benchmark. There is base, air drying base, dry base, dry ash free base. 1. what is bad coal? What are the hazards associated with boiler combustion? Why? Answer: all kinds of coal products of inferior Meizhi ash content is high, the boiler combustion for inferior coal, not only the poor economy, but also cause the burning auxiliary system and convection heating surfaces of serious wear and increased maintenance costs, because the inferior coal ash is relatively high, the economy is bad, the ash content, the heating surface erosion and severe wear. 1., how to manually sampling coal into the furnace? Answer: thermal power plant coal into the furnace in multi sampling coal conveyer belt coal flow in the coal belt, artificial sampling, shovel mouth should be close to a belt, if not hot coal, two times of sampling, sampling should be rotated in the belt on both sides, merge into a sub sample, only manual sampling limited to the belt speed of not more than 1.5m/s, the belt of coal seam thickness is less than 0.3m, and the amount of coal under the condition of not more than 200T/h. 1. write down the whole process of shrinkage of coal samples For each step? What are