离心泵概述（Centrifugal pump overview）.docVIP

离心泵概述（Centrifugal pump overview） First, the basic structure of the centrifugal pump is composed of six parts The basic structure of centrifugal pump is composed of six parts, namely, impeller, pump body, pump shaft, bearing, sealing ring, stuffing box. 1, the impeller is the core part of the centrifugal pump, it is high speed, large output, the impeller blade and play a major role in the impeller before assembly, through the static equilibrium experiment. The inside and outside surfaces of the impeller are required to be smooth, so as to reduce the friction loss of the water flow. 2, pump body, also known as pump shell, it is the main body of the pump. The utility model is provided with a supporting and fixing function and is connected with a bracket for mounting the bearing. 3, the role of the pump shaft is to use the coupling and motor connected, the motor transfer distance to the impeller, so it is the transfer of mechanical energy of the main components. 4, bearings are set on the pump shaft supporting the pump shaft components, there are two kinds of rolling bearings and sliding bearings. Rolling bearings use butter as a lubricant, refueling should be appropriate, generally 2/3 ~ 3/4 of the volume is too much, will heat, too little, there is noise and fever! The plain bearings are made of transparent oil as a lubricant and fill up to the oil level. Too much oil will leak out along the pump shaft and drift low, too little, the bearings will overheat and burn out, resulting in accidents! In the pump running process, bearing temperature is highest in 85 degrees, generally run at about 60 degrees, if higher, will find the reason (whether there is impurities, whether the oil is black, whether water) and timely processing! 5, sealing ring, also known as leakage reduction ring. The gap between the impeller and the pump shell will cause the pump within the high pressure zone of the water flow through the gap area of low pressure water pump efficiency and reduce the inf