分析在建筑电气中接地系统安装设计的各种问题（The problems of installation design of grounding system in building electrical equipment are analyzed）.docVIP

分析在建筑电气中接地系统安装设计的各种问题（The problems of installation design of grounding system in building electrical equipment are analyzed） The problems of installation design of grounding system in building electrical equipment are analyzed Collect this information and print this information. Add: unknown source: unknown -------------------------------------------------------------------------------- Abstract: in recent years because of the fault that caused the accidents often occur, accounts for a large proportion in all kinds of electrical accidents, and lead to more serious consequences, greatly threaten the safety of peoples lives and property. Therefore this article will focus on the discussion of some problems in recent years, grounding systems often have and in the installation of the corresponding improvement measures with everyone, in order to better on the basis of the original to ensure the normal operation of grounding device. Key words: grounding system: common causes; preventive measures A common cause of accidents The grounding resistance is too large, and the grounding device is composed of a grounding body buried in the ground and a ground connecting the grounding body and the grounding wire of the electrical equipment. The grounding resistance of earth and the resistance of ground wire are collectively called grounding resistance of grounding device. The ground resistance is the ratio of the voltage between the grounding body and the surface of the earth to the fault current when it is diffused into the ground from the ground. Because the resistance of the grounding wire is very small and negligible, it can be considered that the resistance of the earth is equal to the resistance of the flow. If the grounding resistance is large, then it will be large. At this point, when the person touches the equipment, there will be an electric shock accident, endangering human life. In case the electrical equipment is not grounded, if the electrical equipment is damaged by