刷漆（Paint brush）.docVIP

刷漆（Paint brush） Brushing steps: Grinding Two, putty Three, brush primer Four. Finish coat Five, polishing Step 1 Check the wall surface, such as stains, use a mild detergent wipe. If the old paint film is loose, remove with paint shovel Step 2 The wall should be filled and polished smoothly if it has a nail hole or unevenness. Step 3 Old newspapers or immediately covered with tape million furniture, flooring, doors and windows, is free of contamination. Step 4 Wear gloves, wear protective clothing, hats. Step 5 Read the instructions of paint oil in detail and dilute the paint oil according to the instructions and stir evenly. Step 6 Start with the ceiling, then the wall, and cover with a coat of paint on top and bottom. Step 7 Repeat with two coats of paint, can get the best effect. Step 8 The used tools should be cleaned as soon as possible. Step 9 Undiluted residual oil can be stored in sealed containers for future repairs. Step 10 Do not leave the paint in the ditch. It will cause environmental pollution. The remaining paint will be left in the old newspaper until it is dry. Illustrated: Http:///decorate/2005-06/25/1991.htm Dead work 1., why before the putty dry, can not scrape a putty? Answer: in general, the family decoration in the walls of putty are done two times, the first time in order to make the whole wall leveling, second times in order to no leveling place, and then do some local treatment. But sometimes we find that the putty on the wall arches up. Why is that? According to the observation, the reason for this is because most of the first times putty is not completely dry workers took second times Nizi blow, results in the drying process in the first second times putty putty arch up. 2. what do you need to do before the ceiling and walls are painted? Answer: in the home decoration construction process, sometimes due to the tight schedule, so the necessary procedure is easy to paint workers omitted; the operation of the workers for example: before the