喷漆2（Spray paint 2）.docVIP

喷漆2（Spray paint 2） Automobile painting process Car paint is usually baking paint. In the car factory, the frame and the shell are welded (and sometimes repaired manually), and the next step is painting. Generally speaking, first of all, it is primer. Dip the light hull into a syrup like paint tank and remove the drying primer. Then send it to a dust-free workshop and spray the paint with an electrostatic spray process. Then, use a temperature of about 200 degrees to dry. A little more paint, and a coat of varnish. So the paint process has been done. There are several general finishes: ordinary paint; metal paint; pearlescent paint. No paint, no resin, no paint, no additives. Metal paint is more aluminum, so it looks bright after it is finished. What about pearlescent paint? Its made of mica. Mica is very thin pieces of things, therefore, the reflection has directional, there will be a colorful effect. If its a metal paint with a coat of paint, the paint will look very bright and beautiful. What about the color? White is undoubtedly the cheapest. For example, the world - class brand is about 25 times more expensive than the world - class brand of titanium dioxide, while the amount of titanium dioxide used in white paint is about 5 times that of the red pigment. Therefore, the cost of red paint on color is 5 times higher than that of white paint. This is why some domestic cars have so few varieties: simple and low in cost. Its paint will fade in the sun no matter what color paint it is. In fact, not only paint, but anything that has color can fade in the sun. At this point, it is important how additives are added to the paint. Such as light stabilizers, such as antioxidants. Unfortunately, good additives are expensive and expensive. In many cases, the quality of the additive determines how the paint feels. People will surely think that some 2 years have begun to show obvious fading paint, which is worse than 5 years. But in fact, there is no paint that does not fade.