宁波申菱电梯变频门机资料（Data of variable frequency gate of Ningbo elevator）.docVIP

宁波申菱电梯变频门机资料（Data of variable frequency gate of Ningbo elevator） Ningbo Shen Ling door system manual I. composition of the system Ningbo Shen Ling gate frequency conversion system hardware part of the use of Japans Panasonic Corp VF-7F 0.4KW inverter, FP1-C14 programmable controller, door machine running speed change position by bistable switching control. 1. The internal wiring of the inverter is shown below Two, switch terminal function Brief Toggle switch When the switch is in the debug state, the system is not responding to external signals, press the manual button to open and close the door, the door machine according to the requirements of open or close; when the switch is in the state of the system when the system is controlled by an external signal, manual opening and closing button does not work. 2 、 manual closing button When the debug switch in debug state, press the button, the door closed for movement, no matter in what position the door stop, press the button, the door closed to immediately stop the machine movement; when debugging in the system state when switching the switch, the button does not work. 3 、 manual door button When the debug switch in debug state, press the button, the door opened the door for movement, no matter in what position the door stop, press the button, the door opened the door to immediately stop the machine movement; when debugging in the system state when switching the switch, the button does not work. Control input The control input section includes the gate position signal input and the external control signal input 4-1 position control signal The XK1-XK4 is the gate position control signal, and the specific timing diagram of the XK1-XK4 in the opening and closing is shown in the following diagram: O 1) timing diagrams for XK1, XK2, XK3, and XK4 Sequence diagram when opening the door Time sequence diagram for closing 2) magnetic switch position: Note: the starting area of the door is not set according to the position of th