局域网ping不通原因（Lan Ping blocked reason）.docVIP

局域网ping不通原因（Lan Ping blocked reason） The reason why Ping doesnt work in LAN and the solution 2010-08-04 22:191. check hardware connection 2. check the TCP/IP protocol 3. check firewall and other software settings 4. if you set the VLAN, see if it is in the same VLAN 5., with advanced settings to prevent Ping By default, all Internet control message protocol (ICMP) options are disabled. as If you use the ICMP option, your network will be visible in Internet and thus vulnerable Assault. If you want to enable ICMP, you must log in as an administrator or Administrators group membership Computer, right click on network neighborhood, and select attribute on the pop-up shortcut menu to open Network connection, select the connection that enabled the Internet connection firewall, and open its properties Window, and switch to the advanced options page, click the settings below, so that appears Advanced settings dialog box, tick on the ICMP tab, and hope your computer rings The requested information type, next to the check box, is the table that enables this type of request. If you want to disable it, please clear it In addition to the corresponding request information type. Two, use network firewall to block Ping Using firewalls to block Ping is the simplest and most effective way, and now basically all of the defense The firewall are enabled by default in ICMP filtering function. Here, with Kingsoft nets, darts 2003 and Skynet firewall 2.50 edition for blue originally explained. For Kingsoft users using 2003, please use the mouse to hit the system tray in Jinshan network Dart 2003 icon, in the pop-up shortcut menu, select the custom IP rule in Utility Editor, in the window that appears, select the defensive ICMP type attack rule to eliminate Allow others to use Ping commands to detect the machine rules, save the application to play an effect. If youre using Skynet firewall, click the custom IP rule on its main screen, though Uncheck prevent someone using ping command to dete