房屋的增层改造技术（Storey adding and rebuilding technology of building）.docVIP

房屋的增层改造技术（Storey adding and rebuilding technology of building） Storey adding and rebuilding technology of building I. overview According to statistics, China currently has 6 billion 600 million m2 buildings, worth 38200 yuan. With the rapid development of the national economy, many of the buildings are restricted by the prevailing economic conditions and improve the level of construction technology, and building structure in building function form, decoration has been unable to meet the requirements of the times, especially at the end of 70s 50 to residential construction, mostly solve eating and sleeping problems, there is little living room, bathrooms, storage rooms, water, heating, gas, electrical appliances and other equipment is poor, and complete rate is very low. Most of these houses are 2~4 storeys, the load-bearing structure has the potential, if the number of residential removed, according to the well-off standard 95 plan to build a new house, the national financial resources to bear, if the quality of the reconstruction method of building structure of the original house better, can achieve economic, applicable and efficient building target. Additional layer modification has the following advantages: 1 the original housing more generally in good location, convenient transportation, perfect life supply area, where the housing renovation without land, the construction area and multiplied, saving land acquisition costs and related costs; 2 in the old house on the pitch layer belongs to the renovation and surrounding buildings can maintain the status quo in the area under the condition of constant, increase the building density in the region, does not affect the normal living environment in the region, by the surrounding residents and housing management departments welcomed; 3 if Taoxing little change during the construction of the original floor, the user does not need to move, so as to solve the housing demolition without transition the problem, save the rel