矿物油、半合成机油和全合成机油的区别（The difference between mineral oils, semi synthetic oils and synthetic oils）.docVIP

矿物油、半合成机油和全合成机油的区别（The difference between mineral oils, semi synthetic oils and synthetic oils） The difference between mineral oils, semi synthetic oils and synthetic oils Time of publication: 2012, 03, 23: Source: Auto Parts editor: TONY The function of engine oil is to lubricate and clean the engine. It can be divided into three kinds: mineral oil, synthetic oil and semi synthetic oil. Total synthetic oil Total synthetic oil is a high grade oil in the engine oil. It comes from ethylene or propylene, which is dispersed by gas or gas in crude oil, and then refines into macromolecular lubricating liquid by complex reaction such as polymerization and catalysis. In essence, it is the use of good ingredients in crude oil, to chemical reaction and reach the expected molecular morphology under artificial control, full synthetic oil molecules arranged orderly, ability to resist external variables of nature is very strong, so a better physique, thermal stability, antioxidant ability and anti reaction viscosity than natural mineral oil and semi synthetic oil is much stronger. mineral oil Mineral oil is the most commonly used lubricant in the market. It is to extract useful substances in petroleum refining, such as gasoline and aviation oil, and then extract the remaining oil from the bottom. In essence, it uses poor components of crude oil. Mineral oil has lower price, longer service life and lubrication performance than synthetic oil, and it also has great pollution to the environment. In addition, the mineral oil in the refining process, because it can not completely remove impurities, so the flow point is higher, not suitable for low temperature areas. Semi synthetic oil Semi synthetic oil is the use of semi synthetic base oil, namely: three international lubricating oil base oil blend, is based on mineral oil through hydrogenation product of fission technology after purification, the purity of semi synthetic oil is very close to the total synthesis of oil, but the cost i