荧光偏振检测系统上位机软件设计.PDFVIP

荧光偏振检测系统上位机软件设计 倪 原 \ 赵 阳 \ 赵 晨 \ 田 华 2, 刘 凯 涛 (1.西安工业大学电子信息工程学院，西安710021; 2.西安外事学院，医学院，西安710077) 摘 要 采 用 Visual Basic 6.0设计了荧光偏振检测系统的上位机软件。首先介绍了荧光偏振检测系统的总体结构，然后对 上位机软件进行了设计，包括串口通信模块、检测操作模块、仪器参数设置模块和系统测试模块的设计。在实际测试 中，通过上位机软件对检测样品进行突光偏振检测，可以看出所设计的上位机软件系统能够正确完成各项功能，对检 测数据的分析计算结果表明，荧光偏振检测系统检测灵敏度高，重复性好，软件能够实现所要求的各项功能，可广泛 应用于生物大分子的检测。 关 键 词 Visual Basic ; 荧光偏振；检测系统 Design of The PC Software for Fluorescence Polarization Detection System Ni Yuan1, Zhao Yang1, Zhao Chen^Tian Hua2, Liu Kaitao (1. Electronic and Information Engineering College, Xian Technological University, XVan 710021; 2. XVan International University School o f Medicine, XVan 710077) Abstract : In this paper , an upper computer software for a fluorescence polarization detection syste was design by use of the Visual Basic 6.0. First , the structure of the fluorescence polarization detection syste was introduced . Then the upper computer software was designed , including the design of serial co unication module , test operation module , instrument parameter setting module and syste test module . In the actual test , fluorescence polarization detection of some samples was detected by the upper computer software . The new-designed upper computer software syste could correctly complete the function . The analysis and calculation results indicated that the detection syste showed high sensitivity , good repeatability , and could be widely used in the detection of biological macromolecules . Key Words : Visual Basic ; Fluorescence polarization ; Detection syste 基于这项技术本文设计了荧光偏振检测仪，分为上位 引言 机和下位机两部分，其中上位机为主机，下位机为从机。下 荧光偏振检测技术应用了荧光标记技术，即把荧光素标 位机的处理器选择基于Cortex -M 3内核的LPC 1768,主要负