点火角控制介绍.pdf

点火角控制点火角控制 点火角控制点火角控制 Security Classification Competency Descriptor Spark Control Dwell control Steady state spark control – Crank – Normal Run – Converter light off – Idle Transient spark control – Idle – DFCO Enter/Exit – Tip-in Bump – Torque Reduction Knock 德尔福/绵阳新晨 保密 2 Spark Control Dwell control – Determine charge time for the coils under all operating conditions – Modes » CRANK Mode, dwell table =ƒ(Ignition Voltage) KtSPRK_t_CrankDwellIgnVolt » RUN Mode, Dwell table=ƒ(RPM , Ignition Voltage) KtSPRK_t_RunDwellIgnVoltRPM » Coolant Correction=ƒ(coolant, Ignition Voltage) KtSPRK_DwellIgnVoltCoolant – Typical values are provided by the ignition system supplier. 德尔福/绵阳新晨 保密 3 Spark Control Spark Delivery mode: – Waste spark: 1+4, 2+3 – Sequential Mode: 1,3,4,2 – Decided by spark coil type Steady state spark control – Crank – Normal – Converter light-off – Idle 德尔福/绵阳新晨 保密 4 Spark Control Steady state spark control – Crank » Cranks in Waste Spark » Calibrated to optimize engine start and flare » Based on a table of engine crank speeds, 0-450 RPM, and coolant temperatures. » Typical values are 3-10° » Calibration is KtSPRK_phi_Base