粉丝捆扎机毕业设计（机械CAD图纸）.doc

粉丝捆扎机设计 摘 要: 由于我国绿色环保食品行业的迅速发展,食品机械越来越受到人们的关注,捆扎包装机械对食品销售、储藏、运输显得尤为重要。本文在相关捆扎机械理论的基础上，运用一般常用机械的传动控制系统，对粉丝进行单带式捆扎，其机械原理设计分为四个部分：送带、收带机构的设计；粉丝丝间歇步进输送机构的设计；压带、热合、剪切凸轮机构的设计；捆扎带引导槽机构的设计。应用现代ADAMS建模与仿真、VB进行运动分析得出凸轮参数，实现对粉丝的捆扎工作。 关键词：捆扎；间歇；凸轮；引导槽；建模与仿真 Design of vermicelli binding machine Student: Yu Xiangzhong Tutor: Gao Yingwu (Orient Science Technology College of Hunan Agricultural University, Changsha 410128) Abstract: Due to the rapid development of China’s green food industry, food machinery draws more and more people’s attention, package tying machine attaches much importance on food sale, storage, and transport. This article is on the basis of package tying, makes use of common mechanical drive control system, straps sweet potato starch noodles with one band, the principle of its mechanical design is divided into four parts: the design of the system of carousel and machine reel, sweet potato starch noodles intermission step conveyor, the cam mechanism for pressure, thermal sealing, shearing and bind guiding trough. It applied by modern modeling and simulation ADAMS, VB sports analysis cam parameters, therefore realized the package of sweet potato starch noodles. Key Words: Tying; Intermission; Cam; Bind guiding trough; Modeling and Simulation 目 录 摘要……………………………………………………………………………1 关键词…………………………………………………………………………1 1 前言……………………………………………………………………………2 2 关于粉丝打捆机的研制开发的可行性报告………………………………2 2.1 粉丝打捆机的目的和意义……………………………………………2 2.2 国内外的粉丝打捆机的研究…………………………………………3 3 捆扎带材料的选择………………………………………………………………3 4 小型粉丝打捆机的机械原理方案设计………………………………………4 4.1 机械总体方案设计……………………………………………4 4.1.1 打捆机压带、热合、剪切机构……………………………………4 4.1.2 送带、收带机构……………………………………………………4 4.1.3 传送运输带部分…………………………………………………4 4.2 间歇传送运输机构方案…………………………………………………5 4.3 送带、收带机构方案…………………………………………………5 4.4 压带、热合、剪切机构方案………………………………………………6 4.5 导向槽的设计方案…………………………………………………8 5 电机的选择………………………………………………………………………9 6 传动装置的总传动比及分配各级传动比………………………………………10 6.1 传动装置的总传动比…………………………………………………10 6.2 分配各级传动比……………