- 5
- 0
- 约2.33万字
- 约 37页
- 2017-10-13 发布于江苏
- 举报
FPGA的数字信号发生器设计
基于FPGA的数字信号发生器设计
摘 要
数字信号发生器是数字信号处理中不可缺少的调试设备,在生产生活中的应用非常广泛。本文所设计的内容就是基于Altera公司的现场可编程门阵列(FPGA)实现数字信号发生器的设计,FPGA具有密度高,功耗低,体积小,可靠性高等特点,设计时可以不必过多考虑具体硬件连接;本设计中应用VHDL硬件描述语言进行描述,使该数字信号发生器可以产生正弦波、方波、三角波、锯齿波四个独立的波形,并能对所产生的四种波形的频率和幅度进行调节。
关键词:直接数字频率合成;数字波形发生器;FPGA;DDS;VHDL
Design Of FPGA-based Digital Signal Generator
Yang Chunjian
(College of Physics Science and Information Engineering, Jishou University,Jishou Hunan 416000)
Abstract
Digital signal transmitter as a test facility is an important part of information processing system. In the production of a wide range of application of life. This cont
原创力文档

文档评论(0)