大学设计：二级公路设计说明书.docVIP

江西省吉安市永新至永丰A段公路设计 摘要 本设计是江西省吉安市永新至永丰A段公路设计，根据任务书的要求， 主要依据交通量，再结合道路的性质、任务及在路网中的地位等确定公路等级为二级，设计时速为60km/h。在此前提下，根据公路等级确定主要技术标准后进行路线平面设计，同时通过比选确定最佳路线方案；在充分考虑满足使用要求、节省造价、平纵组合的基础上进行纵断面设计；选择1.5公里进行横断面设计，同时兼顾超高、加宽设计，由此编制路基设计表，完成土石方调配；土石方分项工程预算、计算并确定路面结构；确定沿线排水、防护工程的位置、结构类型及尺寸；设置交通安全设施。整个设计过程中，始终遵循合理确定技术指标、充分利用周围资源条件以及注重环保的理念。 关键词：二级公路；路线；路基；路面；排水；预算 The A Section of Highway Design From Yongxin To Yongfeng, Jian City, Jiangxi Province Abstract It is about Yongxin to Yongfeng A section of highway design of Jian City, Jiangxi Province.According to the requirements of the task book, mainly based on the traffic flow, and combined with the nature of the road, the task and the status of the road in the whole road-net.Road grade was defined to be the secondary roads, and speed on this highway is limited in 60km / h. On this premise,the plane design will be carried on when the major technical standards are finished according to the identification of the rank of highway, while the best route to go through the program is based on the scheme comparison; the longitudinal design is base on taking full account of the filling and excavating balance, the combination of Horizontal and Vertical; select 1.5 km cross-sectional to design, taking into account the high widening and superelevation design, which is prepared for the subgrade design table, then complete the earth-rock allocation and earth-rock subentry engineering budget.Draw the Pavement Structure according to the traffic levels and the availability of the local materials. To determine the location of the drainage protection works, structure type and size and set of traffic safety facilities. Finally, we make a budget about this separation project. Strive to design a practical, safe mountain road in the process of design, with a reasonable identification of technical indicators, making full use of resources around and paying attention to the concept of environmentally conscious design in the process of the design.Key Words:.