毕业设计卧式双面钻、镗专用机床液压系统.doc

成 都毕 业 设 计 （论 文） 设计（论文）题目：关键词： 液压系统 液压传动 液压元件 Abstract technology in machinery and equipment, especially in recent years combined with microelectronics, computer technology, hydraulic technology has entered a new stage of development, mechanical, electrical, hydraulic, gas integration is the development of machinery and equi Hydraulic drive technology is one of the fastest growing pment today. Has been widely referenced in the CNC machining equipment hydraulic technology. As technology students learn hydraulic numerical control system design, familiar with the working principle of the method of analysis of hydraulic systems, control and selection of hydraulic units and hydraulic systems maintenance and repair is necessary. This thesis mainly expounds mainly elaborated the horizontal double auger, special boring machine hydraulic system, can realize the work cycle is: positioning and clamping machine work cycles to fast-forward, workers enter - die block iron stay - fast back to loosen, pull out the pin - stop in situ. Working condition of hydraulic system design including the system analysis, draw up the hydraulic system schematic diagram, calculation and selection of hydraulic components and hydraulic system performance calculation, the design and the structure of the major parts of the hydraulic cylinder design. Key words: hydraulic system hydraulic transmission hydraulic components.目录 摘要 I Abstract II 第1章 绪论 1 1.1液压传动的发展概况? 1 1.2液压传动在机械行业中的应用? 2 1.3液压机的发展及工艺特点?? 3 1.4液压系统的基本组成?? 4 1.5?液压传动的定义?? 4 1.6液压传动的优缺点? 5 第2章 设计任务 6 2.1要求 6 2.2功能分析、需求设计 6 第3章 液压系统的性能和参数的初步确定 7 3.1运动分析 7 3.2液压缸的负载分析 8 3.2.2导轨摩擦阻力计算 8 3.2.3惯性力计算 8 3.2.4工作负载计算 9 3.2.5重力 9 3.2.6液压缸密封摩擦阻力计算 9 3.3液压系统主要参数计算和工况图的编制 10 3.3.1预选系统设计压力 10 3.3.2计算液压缸主要结构尺寸 10 3.3.3确定夹紧缸的内径和活塞杆径 11 3.3.4编制液压缸的工况图 11 第4章 液压系统的选择和方案的拟定 13 4.1制定液压回路方案 13 4.1.1调速回路 13 4.1.2快速运动回路与速度换接回路 13 4.1.3油源形式 14 4.1.4压力控制回路 15 4.1.5定位夹紧回路 15 4.1.6辅助回路 15 4.2拟定液压系统图 15 第5章 各液压元件的计算和选择 18 5.1液压泵及其驱动电机计算与选定 18 5.