一种新型面内模态直线超声电机的驱动机理及 试验研究.pdfVIP

Open Journal of Acoustics and Vibration 声学与振动, 2014, 2, 29-37 Published Online December 2014 in Hans. /journal/ojav /10.12677/ojav.2014.24004 Research on the Driving Mechanism and Experiment a Novel Linear Ultrasonic Motor Based on In-Plane Modes 1 1 1 2 Yunlai Shi , Jun Zhang , Sen Feng , Bo Li 1 State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics Astronautics, Nanjing Jiangsu 2 Bluestar (Beijing) Chemical Machinery Co., Ltd., Beijing Email: shiyunlai950438@ th th th Received: Jun. 11 , 2015; accepted: Jun. 24 , 2015; published: Jun. 30 , 2015 Copyright © 2014 by authors and Hans Publishers Inc. This work is licensed under the Creative Commons Attribution International License (CC BY). /licenses/by/4.0/ Abstract A new type of linear ultrasonic motor based on the first longitudinal mode and the second bending mode was developed. This paper analyzed the operating principle of the motor and the dynamic properties of the stator using the finite element method, and described the formation process of elliptical motion in detail. The prototype was investigated by the experiment, the motor could reach a maximum speed of 120 mm/s, the maximum thrust of 2.5 N, the ratio of the thrust to weight of 14:1 and the maximum efficiency of 8% at the case of the driving frequency was 55 kHz, peak operation voltage was 400 V, and the pre-pressure was 24 N. Keywords Ultrasonic Motor, Linear, Mode In-Plane, Piezoelectric 一种新型面内模态直线超声电机的驱动机理及 试验研究 1 1 1 2 时运来 ，张 军 ，冯 森 ，李 波