三相逆变电路控制器设计.doc

三相逆变电路控制器设计 摘 要 文章提出了用80C52单片机与高精度三相可编程PWM集成芯片SA4828相结合的三相逆变电路及其控制器的设计方案,介绍了三相逆变器的主电路、控制电路、保护电路和软件的设计原理与过程。试验结果表明,该电源变压变频功能控制灵活、简便、有效,能够较好地适应负载的用电要求。介绍了SA828的原理、优点及应用SA828设计静止逆变器的方法，讨论了静止逆变器的控制单元电路和软件控制的设计原理与设计过程，验证了从静止逆变器中得到预计的PWM波形。 逆变电源的发展是和电力电子器件的发展联系在一起的，随着现代电力电子技术的迅猛发展，逆变电源在许多领域的应用也越来越广泛，同时对逆变电源输出电压波形质量提出了越来越高的要求。逆变电源输出波形质量主要包括三个方面:一是输出稳定精度高;二是动态性能好;三是带负载适应性强。因此开发既具有结构简单，又具有优良动、静态性能和负载适应性的逆变电源，一直是研究者在逆变电源方面追求的目标。 关键词:80C51或52单片机; SA4828;三相逆变电源 SPWM;脉宽调制;数字化 Three-phase inverter circuits controller design ABSTRACT This paper puts forward the 80 C51 single chip microcomputer with 52 and high precision or three-phase programmable PWM integrated chips SA4828 combination of three-phase inverter power supply, the design of three-phase inverter introduced the main circuit and control circuit, protection circuit and the software design principle and process. The test results show that the power frequency conversion variable pressure control function in a flexible and easy, effective, and can better meet the load of power requirements. Introduces the principle of SA838, advantages and application of static inverter SA838 design method, and discusses the static inverter control unit circuit and software of the control design principle and design process, and verifies the static inverter from get expected PWM waves. Inverter power supply is the development of the power electronics device and the development of the contact together, along with the development of modern power electronic technology in the rapid development, inverter power supply in many areas and more extensive application, and the inverter power supply output voltage waveform quality put forward more and more high demand. Inverter power supply output waveform quality mainly includes three aspects: one is the output stability high precision; 2 it is good dynamic performance; Three is to bring load strong adaptability. So development both has simple structure, and has good dynamic and static perfor