正切型非线性包装系统跌落冲击响应分析的何氏PEM与-包装工程.PDF

正切型非线性包装系统跌落冲击响应分析的何氏PEM 与修正 宋浩1 ，李宏卫1，2 (1. 江苏联合职业技术学院无锡机电分院,无锡214028 ；2.江南大学,无锡214122) 摘要：目的 分析得到正切型非线性包装系统跌落冲击的近似解析解，修正提高解的精度，以达到工程要求。 方法 采用解决普遍非线性振动问题的PEM ，并针对跌落冲击动态方程的求解进行了算法修正，选取正切型 非线性包装系统跌落冲击模型为算例，求解得到了一阶近似解；与包装工程中的能量法结合，对近似解进 行了修正。结果 修正后的最大位移响应、最大加速度响应、系统响应周期与Runge-Kutta 数值解非常接近， 相对误差小于4% 。结论 研究为非线性包装系统跌落冲击响应分析提供了一种新的科学有效的近似分析方 法。 关键词：正切型非线性；跌落冲击；近似解析解；PEM ；能量法修正 中图分类号：TB122; TB485.1 文献标识码：A Correction of He’s Parameter-expanding Method for Analyzing Dropping Shock Response of Tangent Nonlinear Packaging System SONG Hao1，LI Hongwei1,2 (1. Wuxi Machinery and Electronic Branch College, Jiangsu Union Technical Institute, Wuxi214028; 2. Jiangnan University, Wuxi 214122) Abstract: To analyze and get the approximate analytical solutions for dropping shock response of tangent nonlinear packaging system and to improve the accuracy of the solutions and achieve engineering requirements by correction, He’s parameter-expanding method (PEM) is used that is applied to solve general nonlinear vibration problems. Taking tangent nonlinear packaging system dropping shock model for an example, for solving the dropping shock dynamic equations, the algorithm is modified and the first-order approximate solutions are obtained. A novel solution combining PEM with energy method was proposed and the approximation solution was corrected. The results show that the maximum displacement response, the maximum acceleration response of the system and the period of the response are very similar to the one by Runge-Kutta method, with relative error of 4%. This research provides a new scientific and effective method for the analysis of dropping shock response of nonlinear packaging system. Key Words:tan