端板连接节点的塑性抗弯承载力-同济大学学报.DOCVIP

高强钢端板连接节点火灾下性能 强旭红，， （同济大学 土木工程学院上海 2000922.重庆交通职业学院，重庆 402247； 3.大连坤龙市政园林建设有限公司，辽宁 大连 116000） 摘要： 关键词： 中图分类号： Experimental and Theoretical Study on Behavior of High Strength Steel Endplate Connections under Fire Conditions QIANG Xuhong 1，， (1. College of Civil Engineering, Tongji University, Shanghai 200092, China； 2. Chongqing Vocational College of Transportation, Chongqing 402247, China 3. Dalian Kun Long Municipal Garden Construction Co. Ltd., Dalian 116000, China) ABSTRACT: In order to obtain behavior and failure mechanisms of high strength steel endplate connections in fire, full-scale tests on 7 joints were conducted at elevated temperature 550℃ under steady state fire condition. The connection specimens included 4 high strength steel endplate connections and 3 mild steel endplate connections. The endplate thickness and the endplate material are the focus of the parametric study. In order to compare, corresponding tests at ambient temperature were carried out as well. Moreover, the current provisions of Eurocode 3 were validated with experimental results. It is found that a proper thinner high strength steel endplate can improve the rotation capacity of connection both at ambient temperature and in fire, and simultaneously achieve similar moment resistance with a mild steel endplate connection, which guarantees the safety of an entire steel structure. KEYWORDS: high strength steel；endplate connections；fire；experimental study；theoretical study建筑火灾威胁着人类的生命和财产安全，作为钢结构研究领域的一个关键问题，火灾对建筑钢结构的影响早已成为相关学术领域的研究热点。梁柱节点是框架结构的重要组成部分，其作用是抵抗梁端荷载并将荷载传递至与节点相连接的柱和其他相邻构件。节点破坏会导致与之相连梁的失效，甚至可能造成整个结构坍塌的严重后果。因此无论在常温下还是在火灾作用下，建筑结构中梁柱节点的力学性能极其重要。 端板连接节点是装配式钢结构的典型节点类型，加工工艺较为简便以及施工安装经济便捷使得端板连接节点大量应用于实际工程项目，尤其是装配式结构中。现行规范，如我国的钢结构设计规范[1]以及欧洲钢结构设计规范Eurocode3[2]，对常温下端板连接节点的强度、刚度和转动能力均做出明确规定。然而，我国钢结构设计规范的适用范围仅限于普通结构钢，Eurocode3通过增加补充条款[3]将其适用范围扩大到S700以下等级的高强钢。 目前，国内外对高强钢的研究主要集中于常温下材料性能以及梁、柱等构件的受力性能[4-7]，对于高强钢结构节点力学性能的研究非常有限。Coelho和Bijlaard[8]的研究表明，常温下S690高强钢端板连接节点具有一定的转动能力，且满足Eurocode3对节点承载力