毕业论文（设计）三角花键拉刀的设计与工艺.docVIP

诚信声明 本人郑重声明：本论文及其研究工作是本人在指导教师的指导下独立完成的，在完成论文时所利用的一切资料均已在参考文献中列出。 本人签名： 年 月 日  年 月 日三角花键拉刀的设计与工艺 摘要 关键词： The design and technology of the triangular spline broach Abstract：Chip part is the main part of the broach, he decides the broaching productivity and machining surface quality. Cutting part design to solve the following tasks: choose broaching, determine the broaching allowance, choose the rake Angle, Angle and the tooth after amount, to determine the pitch and the shape of the chip groove, select points crumbs slot number and size, etc. In the automobile manufacturing industry, triangular spline broach which has been widely applied in production, but no new improvements on the design. With improvement of product quality, it is necessary to design them into shape. According to the conventional design of triangular spline broach, the main problems existing in the process of machining is: almost no lientang broach angles, the broach under very bad conditions chip, will not produce in the broach of the tooth layer \cold welding\, will damage the surface of the keyway processed directly, which reduces the workpiece surface quality, also increase the cutting force, speed up the tool wear, greatly reduce the working life of the broach. Especially when broaching plastic larger metal materials, the conventional triangular spline broach is difficult to machining, trace reducing broach tooth profile and the friction between the grooves, in manufacturing grinding broach tooth will top up after machine (usually is 0.02 ~ 0.04 mm). Keywords: After chip, rake Angle, Angle, capacity chip groove, cold welding layer, broach life 目 录 1 前言 1 1.1本课题研究的目的 2 1.2 选择刀具的类型 2 2 三角花键拉刀的设计 2 2.1 三角花键拉刀的设计参数 3 2.1.1 刀具结构参数及各部分功用 3 2.1.2 三角花键拉刀具体几何参数的设计和选择（注：此处未标单位均以mm表示） 4 2.2 三角花键拉刀在制造中及制造后存在的相关注意事项 11 2.2.1 拉削表面常见的缺陷和解决方法 11 2.2.2拉削过程中出现的问题与解决方法 13 2. 2.3 拉刀寿命降低的问题及改进： 14 3三角花键拉刀的工序过程 16 总结 18 致谢 19 参考文献 20 1 前言