铝溶胶胶体颗粒比表面积测定方法.docVIP

  • 25
  • 0
  • 约6.04千字
  • 约 10页
  • 2017-11-22 发布于福建
  • 举报
铝溶胶胶体颗粒比表面积测定方法

铝溶胶胶体颗粒比表面积测定方法   摘 要 铝溶胶是催化裂化催化剂制备中最重要的粘结剂之一.由于铝溶胶在干燥过程中颗粒从纳米级可以长大到微米级,目前尚没有铝溶胶比表面积测定的报道.采用将一定量的铝溶胶预先高度分散到大孔硅胶孔道内,从而避免铝溶胶颗粒在干燥过程中的长大,将其干燥后测定其比表面积,外推到铝溶胶含量,采用BET法测得铝溶胶比表面积为310 m2/g. 关键词 铝溶胶;比表面积;粘结剂;催化裂化 中图分类号 TQ426.6 文献标识码 A 文章编号2013 Determination Method of the Specific Surface Area of Alumina Sol WEN Jianjun* (Sinopec Catalyst Company, Beijing 100029, China) Abstract Alumina sol is one of the most important binders for the fluid catalytic cracking catalysts.Up to now there is no report on the determination of the specific surface area of alumina sol due t

文档评论(0)

1亿VIP精品文档

相关文档