高架桥工程毕业论文.docVIP

2011 届本科毕业设计（论文） 题目 　 高架桥工程施工组织设计 班 级：2010年春交通土建(本) 考 籍 号：　　 　 　 姓 名：　　 指导教师： 　 年 月 （题 目） 学生姓名： 考 籍 号： 教 学 点： 湖南中远 班 级： 指导教师： 完成日期： 摘要 本施工组织设计路段，。该施工组织设计是指针对本工程项目，在开工前针对工程本身特点和工地具体情况，按照工程的要求，对所需的施工劳动力、施工材料、施工机具和施工临时设施，经过科学计算、精心对比及合理的安排后编制出的一套在时间和空间上进行合理施工的战略部署文件。主要内容包括编制依据与编制原则、工程概况、施工部署、施工准备工作、主要项目施工方法及措施、各种保证措施、施工工艺框图等主要内容，编制出针对性的施工组织设计，每个分部分项工程的特点、结构特征、施工难易程度工期和质量要求，编制出切实可行的施工方案，以指导施工并顺利地完成本工程项目的建设，控制工程成本，创建优质工程。 关键词：施工组织设计；工程特点；施工方案 Summary Construction design of the rail road, Luoyang South Station viaduct Z line, south of Luoyang South Station take a platform and vehicle passengers Road, north of Luoyang South Station Square, and the Bureau of China Railway Group twenty-five the construction of the Luoyang construction and installation company Construction of the basic synchronization South station house. Bridge length of 206m, is located at DK120 +647 ~ DK120 +853, respectively, corresponding to Pier No. A1 ~ A12, this bridge flat in a straight line, grades for the G = 0.0 ‰. The straight-line two-way bridge 5 lane urban roads, the design speed of 30km / h, design A2 ~ A11 beam top width 1.5m +10.5 m +1.5 m +6.5 m +1.5 m +0.5 m = 22.0m, A1 ~ A2, A11 ~ A12 Beam top width of 1.5m +10.5 m +1.5 m +6.5 m +0.5 m = 20.5m, deck cross slope is 1.0%, design load: Road Ⅱ. Full-bridge are used based on bored pile foundation, pile construction according to the design of friction piles, pile caps with access caps, piers piled piers, beams Ministry to adopt (5 × 18 +26 +5 × 18) m cross-linked and other highly prestressed concrete continuous box beam (post-tensioned). The bridge pile foundation were 82, in which the station house is all axes A2 ~ A11 side of the pile diameter are φ1.25m, A2 ~ A5 axis, A8 ~ A11-axis, 4 axis of each pile, A6, A7 each 5-axis A total of 42; Square Side A2 ~ A11 are the axis of all the pile d