三分梁式岔管体形设计与有限元计算 shape design and finite-element analysis of four-girder reinforced trifurcation.pdfVIP

三分梁式岔管体形1-从3-I．计与有限元计算 杨海红1，杨兴义2，伍鹤皋1 (1．武汉大学水资源与水电工程科学国家重点实验室，湖北武汉430072； 2．中国水电顾问集团成都勘测设计研究院，四川成都610072) 摘要：结合埃塞俄比亚GIBE11I水电站三分梁式岔管的实际情况，运用锥锥相贯原理及平面几何关系推导出了三 分岔管两腰梁和两U梁共点的条件和计算公式，并编写了相应的计算程序，在此基础上对三分岔管体形进行了设 计；然后采用ANSYS软件中的APDL参数化设计语言对三分梁式岔管进行了有限元计算，通过以岔管管壁厚度和U 梁厚度、内伸宽度为参数对岔管进行多方案比较，最终提出了合理的设计方案。 111水电站 关键词：三分梁式岔管；体形设计；相贯线；有限元计算；GIBE andFinite-elementof ReinforcedTrifurcation ShapeDesign AnalysisFour-girder YangHaihon91，YangXingyi2，WuHega01 ofWaterResourcesand 430072，Hubei， (1．StateLaboratory EngineeringScience，WuhanUniversity，Wuhan Key Hydropower Corporation，Chengdu610072，Sichuan，China) China；2．HydroChinaChengduEngineering III formulas Abstract：Inaccordancewiththe reinforcedtrifurcationin GIBE Station，the four—girder Ethiopian Hydropower arederivedontheconditionoftwobreast withtwo one meansofthe ofcone girderssharingpointby theory girders U-shape withconeandthe of offormulasis the of intersecting relationshipplanegeometry．Thecomputation programmed，andshape thetrifurcationis onthebasisof structuresof trifurcationare APDLof designed computation．Thedesigned analyzedby ANSYSunderdifferentthicknessanddifferentthicknessandwidthoftheinnerof pipe partU——shapegirders．Theoptimal is designeventuallyproposed． III