太阳能光伏行业真空搬运解决方案.pptVIP

Innovative vacuum for automation Innovative vacuum for automation Innovative vacuum for automation Innovative vacuum for automation Innovative vacuum for automation Innovative vacuum for automation Innovative vacuum for automation Innovative vacuum for automation Innovative vacuum for automation Innovative vacuum for automation Innovative vacuum for automation Innovative vacuum for automation 太阳能和光伏行业的解决方案 BYD公司 * Innovative vacuum for automation * Schmalz opportunities along the PV value chain * Innovative vacuum for automation * Industry solutions Solar / Photovoltaics Process step: Wafer cell handling pick up and positioning 要求: 在搬运电池板的过程中不能出现裂缝及磨损 Schmalz 解决方案: 用带长密封唇的特殊材料的扁平吸盘与弹簧缓冲支杆配合使用 推荐型号: - 真空吸盘: SGPN 15 out of HT1 or NK -真空吸盘: SGPN 24 out of HT1 or NK -真空吸盘: SGPN 30 out of HT1 or NK * Innovative vacuum for automation * Process step: Wafer cell handling 拆垛 要求: 分拆每片厚度小于180 μm单晶硅晶片,并 且不能造成晶片的微小裂纹及在表面留下痕迹 Schmalz 解决方案: 使用无接触吸盘及特殊材料的真空吸盘 推荐型号: - 无接触吸盘: SBS 40 / 60 - 真空吸盘: FSG 12 NBR-55 or HT1 - 真空吸盘: FSGA 11 NBR-55 or HT1 Industry solutions Solar / Photovoltaics * Innovative vacuum for automation * Process step: Wafer cell handling Fast handling and transport Requirements: Handling of wafers and cells with short cycle times for an output of 3.600 pieces per hour. Additional requirements are destacking, inspection and positioning. Schmalz solution: Special area gripper with a low vacuum level, high suction capacity and a contact surface out of the special material PEEK Recommendation: - Wafer gripper: SWG for sizes: 5“, 6“ and String RibbonTM (150 x 80 mm) - Additional module: Sensor system - Additional module: Back illumination with PMMA bottom Customer benefit: Highest acceleration (10g) and shortest cycle times ( 1 Sec.) without lateral slippage or contamination Industry solutions Solar / Photovoltaics Innovative vacuum for automation Innovative vacuum for automation Innovative vacuum for automation Innovati