线圈环架注塑模毕业设计说明书.doc

有需要全套模具毕业设计的请联系我QQ1747634299基于Moldflow的线圈环架塑件模具浇注系统优化设计 摘 要 本次设计分析了线圈环架的塑件工艺特点，并介绍了ABS塑料的成型工艺特点，详细介绍了利用MPI软件，对设计塑件进行注塑成型过程进行模拟分析Optimal Design the Gating System of Coil Gimbal Basd on Moldflow Abstract The injection technological characteristics of Framework of coil are analyzed, and introduce characteristics of ABS plastic molding process, Details of the use of MPI software design plastic parts for injection molding filling process simulation, optimization of casting system based on the analysis, multi-cavity mold casting system and the balanced flow loop coil frame structure design and mold design process and the points.The design of structure of Framework of coil and the design main points of mould are also introduced. The design method of plastic structure is mainly introduced. the selection of injection machine, the decision of the mould cavity number, The selection of sidewall thickness, and the designing process of the parting plane, the exhaust system,In order to achieve Framework of coil smooth surface quality requirements, The design structure characteristics of the Framework of coil are two times parting planes with side gate style.Finally changes to the AutoCAD2008 plan integrity the mold assembly drawing and the main mold detail drawing . When in the designing it is the most importantly deterministic core and the die space structure, as well as their localization and fastens the way, In addition has also analyzed the mold stress, the drawing of patterns organization design, gathers the mold guidance organization the design, the cooling system design and so on. The key is two cavity with one mold injection mold structures and the movement process design, After completes can the automatic reset .Enhances the automaticity, when design the reasonable choice mold material, in the guarantee achieved the intensity requests and saves the cost in the foundation to enhance the production efficiency. KEY WORD : Framework of coil;Plastic injection mould;MPI;Mould