广东必达保安系统有限公司.DOCVIP

Hand held unit instruction Content 1. Hand held Unit 2 2. Hand held Unit profile 2 2.1. Function 2 2.2. Before Using 2 2.3. How to open and shut down 3 2.4. Manus of the hand held 3 3. Driver installation 3 4. Options operation 7 4.1. Change password of handset (change pw of handset) 7 4.2. Communicate with PC (communicate with PC) 8 4.3. Setup system password (setup sys pw) 17 4.4. Setup locks information (setup locks info) 17 4.5. Check locks time (check locks time) 17 4.6. Adjust locks time (adjust locks time) 17 4.7. Check locks battery (check locks battery) 17 4.8. Download locks info (download locks information) 18 Hand held Unit White wire for PC, black one for lock Hand held Unit profile Function Hand held unit is used for setting lock, and audit trail the information, it will make you more convenient to setup the lock. Before Using First, before using hand held, make sure SID card, all the rooms and members have been setup. Second, our handheld is available for Win XP or Win Vista 32bit only, so before using that device, make sure you computer is Win XP or Win Vista 32bit. How to open and shut down Turn on：Press * about 3 seconds. After one beep, the LCD shows entry window meaning that handheld is on. Turn off：Press * about 3 seconds. After one beep, the handset is off. Manus of the hand held When open the handheld, there is a Be-tech logo, Press OK key in entry window, and then follow the indication to enter the correct password and press OK key for logging in, you will see 8 options: Change password of handset (change pw of handset) Communicate with PC (communicate with PC) Setup system password (setup sys pw) Setup locks information (setup locks info) Check locks time (check locks time) Adjust locks time (adjust locks time) Check locks battery (check locks battery) Download locks info(download locks information Driver installation Connect the handheld to the computer, and find out the “communicate with PC, there will be a screen pops