新型鼠标底座注射成形流动仿真及模具设计-精密成形工程.pdfVIP

第 8 卷 第 6 期 精 密 成 形 工 程 2016 年 11 月 JOURNAL OF NETSHAPE FORMING ENGINEERING 85 新型鼠标底座注射成形流动仿真及模具设计 1 2 张丽丽 ，骆俊廷 （1.燕山大学 艺术与设计学院，秦皇岛 066004 ，2.燕山大学 机械工程学院，秦皇岛 066004 ） 摘要：目的设计并制造出新颖、使用方便以及功能齐备的鼠标。方法 采用3D 打印技术打印了新型鼠 标模型。在设计浇注系统的基础上，对新型鼠标底座的注射成形工艺流动过程进行了有限元仿真。分 析了充填成形过程中的充填时间和冷却固化时间、体积收缩率与缩痕、塑件的变形情况、表层与心部 的取向、残余应力以及气孔和熔接线等相关参数。结果 成功完成了鼠标底座的注射成形模具的设计。 结论 采用3D 打印技术与有限元模拟相结合的方法，来开发新型塑料制品，能有效节省设计时间、保 证设计质量。 关键词：鼠标底座；模具设计；注射成形；有限元仿真 DOI ：10.3969/j.issn.1674-6457.2016.06.016 中图分类号：TP391.73 文献标识码：A 文章编号：1674-6457 (2016)06-0085-05 Finite Element Flow Simulation and Mould Design for Injection Forming of New Mouse Base 1 2 ZHANG Li-li , LUO Jun-ting (1.College of Art and Design, Yanshan University, Qinhuangdao 066004, China; 2.College of Mechanical Engineering, Yanshan University, Qinhuangdao 066004, China) ABSTRACT: The mouse is an important accessory in computer equipment and it is the goal of the designer The paper aims to design and create a new mouse which is easy to use and has complete function. A new mouse model This paper designs a new type of mouse with beautiful appearance and comfortable handle is designed, and the mouse model is was printed by 3D printing technology. Based on the design of gating system, the a finite element simulation on of the injection molding forming and flow- ing process of the new type of mouse base is was carried out. The Related parameters such as filling time