dyna中K关键字整理.doc

一，Supported LS-DYNA Keywords The following gathers the supported keywords and their syntax for Explicit Dynamics (LS-DYNA Export) systems. The exported keyword file follows the same format as the corresponding Mechanical APDL application. Keywords conform to the “LS_DYNA Keyword User’s Manual” versions 970 and 971 (version 971 has particular features for the handling of beam cross section and integration options). Each keyword consists of one or more cards, each with one of more parameters. If a parameter is not shown, it will be assigned default values by the LS-DYNA solver. In addition some descriptions to Workbench features that do not relate directly to keywords are given at the end of this section, entitled General Descriptions. 1，*BOUNDARY_NON_REFLECTING Specifies impedance boundaries. Impedance boundaries can only be applied on solid elements in LS-DYNA. Card SSID = ID of segment on whose nodes the boundary is applied (see *SET_SEGMENT bellow). AD = 0.0 (default) for setting the activation flag for dilatational waves to on. AS = 0.0 (default) for setting the activation flag for shear waves to on. 2，*BOUNDARY_PRESCRIBED_MOTION_NODE_ID See *BOUNDARY_PRESCRIBED_MOTION_SET 3，*BOUNDARY_PRESCRIBED_MOTION_RIGID_ID See *BOUNDARY_PRESCRIBED_MOTION_SET 4，*BOUNDARY_PRESCRIBED_MOTION_SET_ID Specifies velocity and displacement boundary conditions. Card required for keyword option ID. ID = ID of the prescribed motion keyword. This parameter is optional and does not have to be unique. An index number is added. HEADING = Name of the specific boundary condition load. The name is taken from the caption of the applied velocity or displacement in the tree outline of the Mechanical application. Card1 ID = ID of set of nodes or part (for rigid bodies) to which the boundary condition is applied. DOF = 1, 2 or 3 depending whether the boundary condition is in the x, y or z direction respectively. Setting 4 is used if the boundary is applied according to a local coo