润滑油报废标准.docVIP

Oil Change Criteria 1. Gearing Systems Fluid Function : Lubricate moving parts Provide cooling Prevent corrosion Performance Factors : Viscosity Rust inhibition EP properties Anti-wear Thermal oxidation stability Anti foam Test Frequency : Every 6 months BP Product Range include: Energol GR-XP Energol GR-XF Enersyn SG Enersyn SG-XP Enersyn HTX Enersyn EPX Hypogear EP Gear Oil EP Gear Oil Application : Generally gearboxes consist of white metals or rolling element bearings, and steel on steel gears, or steel on bronze gears of various configurations, fitted with an enclosure. Speeds loads vary considerably, dependent upon application and gear type. Lubrication may be integral or fed from the oil system of the driving machine. Often gearbox lubricant is rationalised with the driving system lubricant, (such as engine oil).  Test Oil Condition Default Limits Kinematic Viscosity (cSt) Satisfactory + 15% of nominal viscosity Borderline + 15% -20% of nominal viscosity Exceeds Limit + 20% of nominal viscosity Water (% wt.) Satisfactory 0.05% - 0.2% Borderline 0.2% - 0.5% Exceeds Limit 0.5% Acid Number (mgKOH/g) Satisfactory + 0.5 mgKOH/g of nominal acid number Borderline + 0.5-1.0 mgKOH/g of nominal acid number Exceeds Limit + 1.0 mgKOH/g of nominal acid number n-Heptane Insolubles (% wt.) Satisfactory 0.1 % Borderline 0.1%-0.2% Exceeds Limit 0.2% Gear Lubricants Analysis  2. Steam Gas Turbines and General Circulation Systems Fluid Function : Lubricate moving parts Lubricate reduction gearing Provide cooling Rust oxidation corrosion Performance Factors : Viscosity Oxidation resistance Water shedding (demulse) Test Frequency : Every 6 months BP Product Range include : Energol THB Energol TH-HT Turbinol Turbinol EP Energol CS Energol CSM Energol HP Application : Steam turbines are used for main propulsion, electrical power generation and for other direct drive power requirements, (e.g. centrifugal compressors pumps). The syste