DSP第一次实验.docVIP

1.1 GENERATION OF SEQUENCES Project 1.1 Unit sample and unit step sequences A copy of Program P1_1 is given below. Insert program code here. Copy from m-file(s) and paste. % Program P1_1 % Generation of a Unit Sample Sequence clf; % Generate a vector from -10 to 20 n = -10:20; % Generate the unit sample sequence u = [zeros(1,10) 1 zeros(1,20)]; % Plot the unit sample sequence stem(n,u); xlabel(Time index n);ylabel(Amplitude); title(Unit Sample Sequence) axis([-10 20 0 1.2]); Answers: Q1.1 The unit sample sequence u[n] generated by running Program P1_1 is shown below: Insert MATLAB figure(s) here. Copy from figure window(s) and paste. Q1.2 The purpose of clf command is – 清除当前图片 The purpose of axis command is – 控制线性缩放比例和外观 The purpose of title command is – 图表标题 The purpose of xlabel command is – X轴标注 The purpose of ylabel command is - Y轴标注 Q1.3 The modified Program P1_1 to generate a delayed unit sample sequence ud[n] with a delay of 11 samples is given below along with the sequence generated by running this program. Insert program code here. Copy from m-file(s) and paste. % Program P1_1 % Generation of a Unit Sample Sequence clf; % Generate a vector from -10 to 20 n = -10:20; % Generate the unit sample sequence u = [zeros(1,21) 1 zeros(1,9)]; % Plot the unit sample sequence stem(n,u); xlabel(Time index n);ylabel(Amplitude); title(Unit Sample Sequence); axis([-10 20 0 1.2]); Insert MATLAB figure(s) here. Copy from figure window(s) and paste. Project 1.2 Exponential signals A copy of Programs P1_2 and P1_3 are given below. Answers: Q1.6 The complex-valued exponential sequence generated by running Program P1_2 is shown below: Insert MATLAB figure(s) here. Copy from figure window(s) and paste. Q1.7 The parameter controlling the rate of growth or decay of this sequence is - 控制增长和衰减的是：c The parameter controlling the amplitude of this sequence is - 控制幅度的是：K Q1.8 The result of changing the parameter c to (1/12)+(pi/6)*i is –