JL368Q缸盖零件大量生产的的机加工工艺及指定工装的设计.docVIP

重庆工商大学 毕业设计说明书 设计题目 JL368Q缸盖零件大量生产的机加工 工艺及指定工装的设计 院（系） 机械与包装工程学院 专业年级 04机制班 学生姓名 龚明娟 学号 2004111201 指导教师 刘 顺 淑 职称 副教授 设计地点 重庆工商大学 日 期 2008年6月 重庆工商大学毕业设计说明书 JL368Q缸盖零件大量生产的的机加工工艺及指定工装的设计 摘 要：本说明书主要就是针对LJ368Q缸盖零件进行机械加工工艺规程设计,加工顶面上8-φ12.5、8-φ7孔的专用钻模,粗加工底面的铣夹具的设计,以及手绘零件图和对夹具的非标件进行三维造型。本次设计首先对零件进行工艺分析，根据大量生产的生产要求，编制零件的机械加工工艺规程；计算工序尺寸和工序加工余量，然后填写《机械加工工艺综合卡》。编制分析、讨论钻顶面上8-φ12.5、8-φ7孔和铣底面的夹具设计方案，最后得出夹具设计的详细方案。并对指定量规的设计进行了详细的说明，且对指定非标零件进行了三维造型。 关键词：缸盖，机械加工，工艺，夹具，定位，联动夹紧，三维造型 Criticizes the mechanical processing technology produced and design of the jig of the appoint parts of the mass-produced of JL368Q jar’s canopy Abstract: This design is mainly to overlay the part and design the rules of mechanical processing technology to JL368Q jar’s canopy，the bottom surface mill jig and the 8-φ12.5、8-φ7 hole boring jig design, as well as one non-carries on the 3D modelling tender to the jig. This design first carries on the craft analysis to the components, according to mass- produced request, establishment components machine-finishing technological process, the computation working procedure size and the working procedure processing remainder, then fills in Machine-finishing Craft Comprehensive Card.Analyse , discuss to the design plan of the bottom surface mill jig and the the 8-φ12.5、8-φ7 hole boring jig, the detailed scheme that the jig is designed must appear finally. After the jig is designed and finished, write out the jig to operate and sketch. Sketch the nonstandard 3D model of components. Keywords: The right tailstock, the machining , craft , jig , making a reservation , linking clamping , three-dimensional model 目 录 前言..........................................................................4 1.设计课题的提出与设计具体内容.......................................5 2.JL368Q缸盖零件的分析.................................................6 2.1 零件的功用及结构特点.....................................................6 2.2