混凝土工程Concrete Work.docVIP

American FABRICATION AND ERECTION SPECIFICATION Concrete Work 4ACS-640102* Revision 0 March 2xxx Page 1 of 14 RESPONSIBLE GROUP: Civil/Structural Design *Formerly 640.102 Denotes Revision Table of Contents DOUBLE CLICK ON GREEN NUMBER TO GO TO THAT SECTION Section Title Page Purpose 2 Scope 2 Related Documents 2 Materials and Products 3 Concrete Mixes 5 Equipment and Facilities 7 Form Work 8 Embedded Items 9 Concrete Construction 9 Testing and Inspection 12 DOUBLE CLICK ON GREEN TOC TO RETURN TO TABLE OF CONTENTS 1. purpose 1.1 This specification defines the minimum requirements for materials, testing, installation, and inspection of concrete work. 2. scope 2.1 The contractor shall furnish all supervision, labor, materials, tools, equipment, and services necessary to produce, deliver, and place ready-mixed concrete at the job site. The term ready-mixed concrete (as used herein) shall be understood to be applicable to concrete produced by the central-mixed, shrink-mixed, or truck-mixed methods. 3. RELATED DOCUMENTS 3.1 Xxxx Engineering Document 4WCE-600001 General Scope of Work for Construction Contract 309707D LOX Compatible Joint Details for Concrete Work 3.2 American Concrete Institute (ACI) 117 Standard Specifications for Tolerances for Concrete Construction and Materials 211.1 Standard Practice for Selecting Proportions for Normal, Heavyweight, and Mass Concrete 301 Specifications for Structural Concrete for Buildings 304R Guide for Measuring, Mixing, Transporting, and Placing Concrete 305R Hot Weather Concreting 306R Cold Weather Concreting 308.1 Standard Specification for Curing Concrete 309R Guide for Consolidation of Concrete 318 Building Code Requirements for Structural Concrete and Commentary 347 Guide to Formwork for Concrete American National Standards Institute (ANSI) A10.9 American National Standard for construction and demolition operations – concrete and masonry work safety requirem