基于Solid Works的双顶置凸轮轴的设计与建模.pdfVIP

·36 · 价值工程 基于Solid Works 的双顶置凸轮轴的 设计与建模研究 The Dual Overhead Camshaft Design and Modeling Study Based on Solid Works 王远阳 WANG Yuan-yang ；王红 WANG Hong （新疆工业高等专科学校，乌鲁木齐830091） （Xinjiang Polytechnical College ，Urumchi 830091 ，China） 摘要： 本文以Solid Works 为平台，利用其强大的参数化造型技术和Solid Works 提供的二次开发模块，建立汽车的双顶置凸轮轴 参数化设计与三维实体建模，以适应机车新产品的设计和开发，与CAD 软件建库方案相比较，Solid Works 具有基于特征，全尺寸的约 束，尺寸驱动设计修改，全数据相关等特点，适合标准件的建模，提高了设计效率。 Abstract: Based on the powerful meritorious service capacity, the manual detailed elaborates application situation in three dimensions design. This specification book takes the camshaft as the example, elaborate the full process of using Solid Works to design camshaft. It consists of the camshaft structural analysis, mastering how to create the different features of Solid Works, how to construct date room and two dimension engineering drawing export and so on many-sides work, Using Solid Works to design camshaft and constructing parts date room are the key of the introduction. It illustrates the fundamental train of thought of camshaft model making, detailed introduces how to construct the main step of constricting parts date room. 关键词： Solid Works ；凸轮轴；参数化设计；建模 Key words: Solid Works ；camshaft ；parametric design ；modeling 中图分类号： 文献标识码： 文章编号： TH222 A 1006-4311 （2012）31-0036-03 0 引言 直接对曲面的操作，能控制参数曲面的形状。通过简单 目前，有多种基于不同CAD 支撑软件的标准件库， 地点取并延伸分型线，能生成非平面的分型面。典型应