基于IIS的WEB服务器数据采集系统.doc

本科毕业设计(论文) (2015届) 论文题目基于IIS的WEB服务器数据采集系统 (英文) Data acquisition system based on the IIS WEB server 所在学院 电子信息学院 专业班级 学生姓名 学号 指导教师 职称 完成日期 2015 年 4 月 10 日 基于IIS的WEB服务器数据采集系统 2015年4月 摘 要 目前针对基于WEB服务器的数据采集系统的研究很热门，运用小型的WEB服务器和数据库技术可以将大量数据存储，然后通过网页显示。该系统特别适合用于智能家居，在家中各处需要采集数据的地方布满传感器，采集完后统一上传至服务器，服务器端可以通过网页供用户远程浏览。并且方案简单易行，资料较多，容易实现。 本系统的上位机采用的是IIS+access+asp经典的WEB系统的体系结构，下位机是传感器结合单片机，再通过网络模块使上下位机进行数据交互。即由底层各种传感器采集环境中的各类数据，汇集至STM32单片机处理转换，再由网络模块接入Internet，并与服务器建立TCP连接，以HTTP通信协议将数据上传至IIS服务器。服务器后台为Access数据库，用来存储上传的数据，服务器端由ASP网页呈现数据库中所存的数据，可通过浏览器以网页方式访问查看数据。 关键词：WEB服务器 ；Internet；HTTP协议；STM32单片机；传感器 Abstract Currently the study of the data acquisition system based on WEB server is very hot, use the small WEB server and the database technology can be a large number of data storage, and then through the WEB page display. The system is especially suitable for used in smart home, everywhere is full of sensing points need to collect data at home, after the acquisition unified uploaded to the server, the server can be remotely through web page for users to browse. And the solution is simple, the data is more and easy to implement. The upper computer of this system adopt a classic WEB system architecture of IIS + asp + Access and the lower computer is sensor combined with single chip microcomputer. By the underlying various sensor collect various kinds of data of environment, together to the STM32 MCU processing and conversion, then by the network module connected to the Internet, and set up the TCP connection to the server, through the HTTP protocol to upload data to the IIS server. The server backstage is an Access database which used to store the uploaded data. The server is comprised of ASP web pages appear in the database`s data. It can be through the browser to web Access to view the data. Key words: WEB server; Internet; HTTP protocol; STM32 MCU; Sensor 目 录 1 引言 1