等效串联电阻(ESR)论文：射频微波多层瓷介电容器的研制.docVIP

等效串联电阻(ESR)论文：射频微波多层瓷介电容器的研制 【中文摘要】高频化、高速化是信息化发展的方向之一,而电容器又是信息领域的基础元件,这势必要求电容器向高频化发展。射频微波多层瓷介电容器就是电容器中一个重要类别。射频微波多层瓷介电容器主要用于射频功率放大器、混频器、振荡器、低噪声放大器、滤波网络、记时电路、延时线、天线调谐、磁共振成象仪、发射机等线路中,起阻抗匹配、调谐、耦合、隔直、滤波、旁路等作用,具有可靠性高、品质因数(Q值)高、等效串联电阻(ESR)低、性能指标稳定、使用频率范围宽、在射频微波频率下能通过较大的射频电流等技术特点。本文从工程实际出发,结合相关原理,对CC411型射频微波多层瓷介电容器所用的材料与生产工艺进行了研究,并完成了产品的设计定型。本文研究的主要内容是:1.通过对三种介质材料的微观分析、产品性能测试、放量试验,最终确定选用自制的M1AG200瓷料作为该产品的介质材料。2.通过对内电极浆料进行无机添加剂、有机体系和金属体系的调整试验,结合产品的内部结构质量、电性能和射频微波性能测试,确定选用E-1153P-1为该产品使用的内电极浆料。3.通过调整烧银曲线和端电极材料,结合产品的端电极质量和电性能,确定采用TM63-149为该产品的端电极材料。4.通过调整粘合剂的比例和种类,对比所生产产品的内部结构质量情况,确定了瓷浆料配方为:瓷料:粘合剂:甲苯:酒精=1:0.41:0.41:0.2,且所用粘合剂为B74001。5.采用了不同的印刷工艺和叠压工艺进行对比试验,确定了印刷的工艺参数为:丝网高度为0.8～0.9mm,刮条压强为0.12～0.14MPa,刮条速度为40～42mm/s;叠压的工艺参数为:叠压的压力为100bars,叠压时间为60s,叠压温度为70℃。6.采用了不同的排粘和烧结曲线进行对比试验,确定了最佳排粘曲线和分段烧结曲线。 【英文摘要】The capacitor is the basic component in the information field which will require capacitor developing to high frequency, because of high frequency and high-speed are among the information technology development direction. RF/microwave multi-layer capacitor is an important class of capacitor, with the characteristics of high reliability, high Q, low ESR, stable performance, wide frequency ranges, a larger RF current, which mainly used for circuits of RF power amplifier, mixer, oscillator, low noise amplifier, filter network, timer circuit, delay line, antenna tuning, MRI, transmitter.From the points of view for practical uses and combined with related principles, the material and production technology of CC411 RF/microwave multi-layer capacitor are researched and the product design, shape are completed in this dissertation.The content of the paper are as follows:1. Choosing self-made M1AG200 porcelain as the medium material through carrying out comparison to 3 kinds of medium material by macro analysis, product performance testing and peatlands test.2. Choosing E-1153P-1 as the Inner Electrode paste through carrying out adjustment test of Inorganic additives, organic systems and m