mcm 本科.docxVIP

The Snowboard Course AnalysisTeam 10140AbstractKeywordsContentsIntroductionWe know that a half-pipe is a structure used in gravity extremely sports such as signboard, skateboarding,skiing. And it is one of the most challenging sports everywhere in our world.Now the question is how to determine the shape of a snowboard course (currently known as a “half-pipe”) to maximize the production of “vertical air” by a skilled snowboarder. The so-called “vertical air is the maximum vertical distance above the edge of the half-pipe.Of course, our design of the half-pipe should also take some other factors such as maximum twist in the air, center of gravity of snowboarder ,thesmooth degree of plat bottom ,and the harmonious of snowboarder’s motion into consideration. Therefore, we can adopt several strategies to design a “practical course” and solve the problem.And in practical condion, we need to repair and build a half-pipe. Our train of thought can be drawn like this: （figure）AssumptionsBecause of the mass of the snowboard is more less than snowboarder’s mass, we’d better ignore its mass.When snowboarder goes skiing, we can consider his motion as akind of rigid motion.Don’t take varied temporary, pressure, and density when solving problems. Because different those factors can arise different coefficient of friction and other parameters’ variation.Analysis of Problem In order to design a model, we usevideo studying, documents research, data estimatingand so on. How to design a “practical” half-pipe? We need to some reference book. For instance we need search the general standard of it and calculate then make a program.Model Designing4.1OverviewOur model will be built in several steps. We want to start from easy condition to complex condition.Several situations are presented as follows.4.2In the first three cases the half-pipe is placed in horizontal planet. 4.2.1 No air friction and no snow friction.In this case, the work which is done by snowboarder is transformed to his grav