灌装包装生产记录.docVIP

LOTION AND GEL FILLING BATCH PRODUCTION RECORD 化妆品灌装包装生产记录 起草/日期DRAFT BY: ________________________ 审核/日期CHECKED BY: ______________________ 生效日期ISSUE DATE: ______________________ SUPERVISOR PRE-FILLING REVIEW (CHECK ALL THAT APPLY) – 灌装前主管复核目录(如被执行, 请打钩号) [ ] ALL MATERIAL OF PREVIOUS PRODUCTS MUST HAVE BEEN CLEARED AND CLEANED. 上批产品所余物料已清除或退料，以防交叉污染。 [ ] T. THE RESULTS MUST BE RECORDED. 灌装设备和流水线表面完整及功能正常，已被清洁消毒并记录。 [ ]B. THERE MUST HAS STANDARD SAMPLE ON LINE. 产品是否有标样。 [ ] ALL BULK HAVE STAGED, IDENTIFIED AND ARE WITHIN EXPIRATION DATE 所有半制品及包装材料有标识, 准备就绪, 确认无误, 并在有效期内. [ ] ALL EQUIPMENT HAS BEEN CLEANED 所有设备按照已被清洁消毒. [ ] THE FORMULA HAS BEEN ISSUED AND APPROVED BY THE QUALITY CONTROL DEPARTMENT [ ] THE FILLING AND PACKAGING PERSONNEL ASSIGNED TO THIS BATCH HAVE BEEN TRAINED 灌装和包装此批产品的配制工是否被适当地培训. [ ] PACKAGING SUPERVISION HAS REVIEWED ALL THE REQUIREMENTS WITH THE PERSONNEL ASSIGNED TO FILL AND PACKAGE THIS BATCH 包装部门管理人员已确认灌装和包装所需的所有必要条件. _______________________________________ DATE (日期): _____._____._______ SUPERVISOR (生产主管) 工序 Working Procedure 操 作 Operation 记 录 Record 操作人/时间 Operate by 复核人/时间 Check by 备料 Prepare 将瓶子和泵头去掉包装,放入洁净的塑料筐中,紫外杀菌半小时,将要灌装的内料拖到相应的灌装线上，将外箱标签和塑料袋清洁后拖到包装线上 Take off the package of the bottle and pump, put into the clean plastic box, sterilization with UV, and pull all the other components on the packaging line. 瓶批号Bottle Batch No.：_______________ 泵批号pump Batch No.：_______________ 半制品批号Bulk Batch No.：_____________ 灌装 Fill 先将灌装机的灌装量调整到规定值，将灌装机头对准瓶口进行灌装。然后插入泵头，旋紧并锁口Adjust the filling quantity, begin to fill, then insert the pump and make it tight and locked. 半制品数量Bulk Quantity：__________kg 单瓶灌装量Per Bottle Qty.：___________ G 喷码 Sprinkle Code 喷码位置是否正确 喷码内容是否完整 Made in China Label Batch No.：________________ MFG：________________ 收缩膜封口 Seal 调整吹风机温度，将收缩膜套于泵头进行封口 Adjust the temperature then put the shrink f