基于敏感性分析的加锚岩质边坡锚固参数优化设计-南水北调与水利科技.pdfVIP

第 11 卷 第4 期 南 水 北 调 与 水 利 科 技 Vol.11 No.4 2013 年 8 月 South2to2 North Water Transfers and Water Science Technology Aug . 2013 doi : 10. 3 24/ SP. J. 1201. 2013. 04200 柏俊磊, 王乐华, 王瑞红 ( 三峡大学 三峡库区地质灾害教育部重点实验室, 湖北 宜昌443002) : 某水电站泄洪洞进口边坡拟采用预应力锚索进行加固。锚固参数的合理选取将直接影响到工程加固的可靠 性以及经济性。因此, 首先对该加锚边坡的预应力锚索的4 个参数( 锚固角度 5 、锚固力T、锚固间距H 以及锚索长 度L) 进行敏感性分析, 确定了这些参数的敏感性大小。然后再利用有限元法进行参数优化设计, 得到了预应力锚 索加固的最佳锚固参数。研究结果为提高开挖边坡的加固效果、降低工程的设计施工成本, 起到了积极的作用。 : 边坡; 预应力锚索; 均匀设计; 敏感性; 有限元 : TV223 :A : 16 22 1683( 2013) 0420200206 Optimization Design of Anchorage Parameters of an Anchor Slope Based on Sensitivity Analysis BAI Jun2lei, WANG Le2hua, WANG Ru2i hong ( China Three Gorges University, K ey L aboratory of Geolog ical H az ards on Three Gorg es Reservoir rea, M inistry of Ed ucation, Yichang 443002, China) Abstract:The inlet slope of Spillw ay tunnel at a hydropow er station is reinforced w ith the prestressed anchor cable.The reason2 able select ion of anchor paramet ers affects the reliability and economy of engineering reinforcement directly . In this paper, sens2i tivit y analysis was performed on four anchor parameters ( anchor angle 5 , anchoring force T , anchor spacing H , and anchor cable length L) of the anchor slope, and t he finite element method was used for parameter opt imization design based on the result s of sensitivity analysis to obtain the best anchor parameters for reinforcement of prestressed anchor cable.The results can offer val2 uable references to improve the reinforcement effect s of excavation slope and reduce the cost of project design and const ruction. Key words:slope; prestressed anchor cable; uniform design; sensitiv