采购技术条件螺母(中英对照).docVIP

HG PURCHASE SPECIFICATION 采购技术条件 DOC. NO. UD2-08U1-4 REV. 1 PAGE 1 OF 4 PURCHASE SPECIFICATION FOR CARBON STEEL HEAVY NUTS, SA – 194 Gr.2H SA-194 Gr.2H 螺母采购技术条件 JOB. NO.:08U1 DRAWING NO.: U-08-1/Rev.0 3 2 1 0 REV. DATE DESCRIPTION DESIGNED BY APPROVED BY HONGGUANG CHEMICAL EQUIPMENT Co.,Ltd. HG PURCHASE SPECIFICATION 采购技术条件 DOC. NO. UD2-08U1-4 REV. 1 PAGE 2 OF 4 This specification is provided descriptions for purchasing nuts material 本技术条件对采购下列材料进行了规定. Specification designation 材料牌号 ASME Code Sect. II 2007Ed, SA-194M Gr.2H. Name of item 零件名称 Carbon steel Jam Nuts 碳钢锁紧螺母 Quantity, Description of item and Size 数量,名称和型号 Part No 编号. Quantity 数量 Description of item 名称 Nominal size (mm) 型号 Drawing No. or standard No. 标准号 1 48 Heavy nuts M20 ASME B18.2.4.5M 4. Dimension 尺寸 4.1 Nuts shall be hexagonal in shape, and in accordance with the dimension for the heavy hex series, as required by ASME/ANSI B18.2.4.6M. 螺母为六角形螺母,尺寸和形状按照ASME/ANSI B18.2.4.6M标准制造 4.2 Unless otherwise specified, threads shall be in accordance with ASME B1.13M and shall be gauged in accordance with ANSI/ASME B1.20.1. 除指明的不同处外,螺纹符合ASME B1.13M要求并且符合ANSI/ASME B1.20.1.的要求. 4.3 The nuts shall be 8UN Series Class 2B fit. 螺母为8UN系列等级为2H. Manufacture 制造 Nuts shall be made by machine from hot-forged bars and shall be quenched and then tempered at a temperature not less than 455℃. 螺母由热锻制成,并且在不低于455℃的温度下回火处理. Chemical requirements 化学成分 The heat analysis of the nut materials shall conform to the chemical composition requirements HG PURCHASE SPECIFICATION 采购技术条件 DOC. NO. UD2-08U1-4 REV. 1 PAGE 3 OF 4 prescribed as follows. 熔炼分析化学成分应符合下表的规定 Grade Symbol 等级 Material 材料 Carbon min. 最小碳含量 Manganese max. 锰最大 含量 Phosphorus max. 磷最大 含量 Sulfur max. 硫最大含量 Silicon max. 硅最大 含量 2H Carbon Steel 0.40% 1.00% 0.040% 0.050% 0.40% Hardness requirements 硬度需求 The brinell hardness shall be approximately HB 248-352 . 螺母的硬度应当为HB248-352 Proof load